Coming Together

Putting in a few controls with permanent hardware now.  First was to install the elevator forward bellcrank.

Forward is to the left where the push pull tube is located at the bottom and the two cables to the right go through the aft fuselage to the rear bell crank here:

That's the bell crank through the access hole.

The control sticks ar in also.

Pilots's

And passenger

These bolts need to be safety wired

And the brake cylinders are in except the bottom bolts are not correct yet.  These attach to the passenger pedals.

I also have to attach the brake lines and route them to the landing gear legs.

All for now.